Flash Dump Starsat 7100 Fta China15
Flash Dump Starsat 7100 Fta China15 ::: https://tinurll.com/2twcQI
How to Flash Dump Starsat 7100 Fta China15
Starsat 7100 Fta is a satellite receiver that can be used to watch free-to-air channels. It has a USB port that allows you to update its software and firmware. However, sometimes you may encounter problems with your receiver, such as freezing, crashing, or losing signal. In such cases, you may need to flash dump your receiver to restore its functionality.
Flashing dump means copying the data from the memory chip of your receiver to a file on your computer. This file can then be used to reprogram your receiver or fix any errors. Flashing dump can also help you to unlock new features or channels on your receiver.
To flash dump your Starsat 7100 Fta China15, you will need a USB flash drive, a computer, and a software called Flash_Dump_STARSAT SR-7100 FTA.rar[^1^]. You can download this software from satsupreme.com[^1^], a website that provides files and information for satellite equipment.
Here are the steps to flash dump your Starsat 7100 Fta China15:
Format your USB flash drive to FAT32 file system.
Extract the Flash_Dump_STARSAT SR-7100 FTA.rar file to your computer. You will get a file called Flash_Dump_STARSAT SR-7100 FTA.bin.
Copy the Flash_Dump_STARSAT SR-7100 FTA.bin file to the root directory of your USB flash drive.
Turn off your Starsat 7100 Fta receiver and disconnect it from the power source.
Insert the USB flash drive into the USB port of your receiver.
Press and hold the POWER button on your receiver and connect it to the power source. Keep holding the POWER button until you see \"USB\" on the display of your receiver.
Release the POWER button and wait for the flashing process to complete. It may take a few minutes. Do not turn off or unplug your receiver during this process.
When the flashing process is done, you will see \"END\" on the display of your receiver. Remove the USB flash drive and restart your receiver.
Congratulations! You have successfully flashed dump your Starsat 7100 Fta China15. You can now enjoy watching free-to-air channels on your receiver.
Flashing dump your Starsat 7100 Fta China15 can also help you to upgrade your receiver to a newer version. For example, you can flash dump your receiver with a file called StarSat_SR-X7100USB_29E_V5_20130128.bin, which is the latest software update for your receiver. You can download this file from satdl.com, another website that provides files and information for satellite equipment.
To flash dump your Starsat 7100 Fta China15 with this file, you can follow the same steps as above, but use the StarSat_SR-X7100USB_29E_V5_20130128.bin file instead of the Flash_Dump_STARSAT SR-7100 FTA.bin file. This will update your receiver to the latest version and improve its performance and stability.
However, flashing dump your Starsat 7100 Fta China15 is not without risks. If you use a wrong or corrupted file, you may damage your receiver or make it unusable. Therefore, you should always backup your original file before flashing dump your receiver. You can do this by using a software called dump_Starsat_7100_FTA.rar, which can read and save the data from your receiver's memory chip to a file on your computer. You can download this software from satsupreme.com as well.
To backup your original file, you will need a RS232 cable, a computer, and the dump_Starsat_7100_FTA.rar software. Here are the steps to backup your original file:
Extract the dump_Starsat_7100_FTA.rar file to your computer. You will get a file called dump_Starsat_7100_FTA.exe.
Connect the RS232 cable between your receiver and your computer.
Run the dump_Starsat_7100_FTA.exe software on your computer. It will detect your receiver and show its information.
Click on the \"Read\" button to start reading the data from your receiver's memory chip. It may take a few minutes. Do not turn off or unplug your receiver or computer during this process.
When the reading process is done, you will see a message saying \"Read OK\". Click on the \"Save\" button to save the data to a file on your computer. You can name it as you wish.
Now you have a backup of your original file. You can use this file to restore your receiver if anything goes wrong with flashing dump. To restore your receiver, you can follow the same steps as above, but use the \"Write\" button instead of the \"Read\" button and select your backup file instead of the flash dump file. aa16f39245